Electric hot water dispenser is a device that can automatically distribute hot water according to a set share. The following is a detailed introduction to the electric hot water dispenser:

First, the working principle

The working principle of electric hot water dispensers usually involves the following steps:

1. After the equipment is powered on, the motor starts to work and drives the internal mechanism to operate.

2. Hot water enters the distributor from the water inlet and is heated to a certain temperature before being stored in the hot water container.

3. When hot water needs to be distributed, the control panel will send a signal to the motor to drive the water separator head to start working.

4. The water separator head draws hot water from the container in accordance with the set share and distributes it to different water outlets.

Two, the main components

The main components of the electric hot water distributor include:

1. Main machine: including motor, control panel and liquid crystal display and other components, responsible for the overall operation and control of the equipment.

2. Water separator head: It is responsible for extracting hot water from the container and distributing it according to the set share. Its design usually ensures that hot water is evenly and accurately distributed to each outlet.

3. Hot water container: used to store hot water after heating, to ensure that enough hot water can be provided when needed.

4. Control panel: Provides a user interface, allowing users to set the required hot water share, water separation speed and flow size and other parameters. The LCD display displays the current Settings and working status, which is convenient for users to monitor and adjust.

Three, functional characteristics

1. Precise distribution: The electric hot water distributor can accurately distribute hot water according to the user's set share to meet different use needs.

2. Intelligent control: Through the control panel, users can easily set and adjust the hot water distribution parameters to achieve intelligent control.

3. Energy saving and environmental protection: The equipment uses high-efficiency energy-saving technology to reduce energy consumption and emissions, in line with modern environmental protection concepts.

4. Safe and reliable: the equipment is equipped with multiple safety protection measures to ensure that no accidental injury or failure will occur during use.

4. Use and maintenance

1. Preparation before use: Before using the electric hot water dispenser, please read the product manual carefully and operate correctly according to the requirements. Ensure that the device is placed on a smooth surface and connected to the power supply.

2. Operation process: Open the power switch on the control panel, use the button or knob to set the required hot water share, water separation speed and flow size and other parameters. Place the separator head in the hot water container, making sure it is fully submerged. When the start button is pressed, the device automatically starts to work and distributes the hot water according to the set share.

3. Maintenance: Regularly clean and disinfect the water separator head to keep it clean and hygienic. If you need to replace the parts or repair the equipment, contact the after-sales service center or professional maintenance personnel. Avoid sticking your fingers or other objects into the inside of the separator head to avoid accidental injury.